smproline » Products

DLA 7500

Florin — Fri, 08 May 2015 09:01:52 +0000

Designed for years of reliable, flawless operation under rigorous use, the groundbreaking DLA series utilizes an advanced design that dramatically reduces weight, while increasing output power, reliability and thermal efficiency. Best of all, it is pre-loaded with a custom library of Danley product presets, so, dialing in great sound has never been easier! DLA Series amplifiers are also designed with a resonant switch-mode power supply and a high speed class D topology that yields the highest audio resolution and efficiency available.

Specifications

Rated Power Both Channels Driven

(2 x 2 Ohms)
3790 watts 1% THD @ 1kHz.
(2 x 4 Ohms)
2450 watts 1% THD @ 1kHz.
(2 x 8 Ohms)
1425 watts 1% THD @ 1 kHz.

Features

Controls
Detented input controls
Connectors
4 pole twist lock output connectors
Dimensions
3.5”x 19”x 17.25”
Weight
15.2 lbs.

DSLA 1.7K

Florin — Fri, 08 May 2015 09:03:58 +0000

Danley Sound Labs’ DSLA Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Danley amplifier. Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed, transparent high frequency response. And, thanks to the IGM™ circuit, the DSLA 1.7K Series will drive 2Ω loads safely without compromising performance.

Specifications

Rated Power Bridged Mode

4 Ohms
1,700 Watts @ 1 kHz at <0.1% T.H.D.
8 Ohms
1,050 Watts @ 1 kHz at <0.1% T.H.D.

Rated Power Both Channels Driven

(2 x 2 Ohms)
850 Watts per channel @ 1 kHz <0.1% T.H.D.
(2 x 4 Ohms)
525 Watts per channel @ 1 kHz at <0.05% T.H.D.
(2 x 8 Ohms)
290 Watts per channel @ 1 kHz at <0.025% T.H.D.

Rated Power

(1 x 2 Ohms)
950 Watts @ 1 kHz at <0.1% T.H.D.
(1 x 4 Ohms)
550 Watts @ 1 kHz at <0.05% T.H.D.
(1 x 8 Ohms)
300 Watts @ 1 kHz at <0.025% T.H.D.

Features

Controls
Two front panel attenuatorsRear panel mode switch

Gain select switch
Connectors
XLRSpeakon and Binding Post speaker output either 120V 15 amp IEC mains or 240/230V 20 amp IEC Mains
Dimentions
3.5”x19”x12.25”x1.5”
Weight
29.1 lbs.

DSLA 4.5K

Florin — Fri, 08 May 2015 09:05:27 +0000

Danley Sound Labs’ DSLA Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Danley amplifier. Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed, transparent high frequency response. And, thanks to the IGM™ circuit, the DSLA 4.5K Series will drive 2Ω loads safely without compromising performance.

Specifications

Rated Power Bridged Mode

4 Ohms
4,500 Watts @ 1 kHz at <0.1% T.H.D.
8 Ohms
2,900 Watts @ 1 kHz at <0.1% T.H.D.

Rated Power Both Channels Driven

(2 x 2 Ohms)
2,250 Watts per channel @ 1 kHz <0.1% T.H.D.
(2 x 4 Ohms)
1,450 Watts per channel @ 1 kHz at <0.05% T.H.D.
(2 x 8 Ohms)
825 Watts per channel @ 1 kHz at <0.025% T.H.D.

Rated Power

(1 x 2 Ohms)
2,800 Watts @ 1 kHz at <0.1% T.H.D.
(1 x 4 Ohms)
1,600 Watts @ 1 kHz at <0.05% T.H.D.
(1 x 8 Ohms)
880 Watts @ 1 kHz at <0.025% T.H.D.

Features

Controls
Two front panel attenuatorsRear panel mode switch

Gain select switch
Connectors
XLRSpeakon and Binding Post speaker output either 120V 30 amp twist lock connector or 240/230V 20 amp IEC Mains
Dimensions
3.5” x 19” x 12.25” + 1.5”
Weight
29.1 lbs.

DSLA3.3K

Florin — Fri, 08 May 2015 09:08:41 +0000

Danley Sound Labs’ DSLA Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Danley amplifier. Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed, transparent high frequency response. And, thanks to the IGM™ circuit, the DSLA 3.3K Series will drive 2Ω loads safely without compromising performance.

Specifications

Rated Power Bridged Mode

4 Ohms
3,300 Watts @ 1 kHz at <0.1% T.H.D
8 Ohms
2,000 Watts @ 1 kHz at <0.1% T.H.D

Rated Power Both Channels Driven

(2 x2 Ohms)
1,650 Watts per channel @ 1 kHz <0.1% T.H.D
(2 x 4 Ohms)
1,000 Watts per channel @ 1kHz at <0.05% T.H.D.
(2 x 8 Ohms)
590 Watts per channel @ 1 kHz at <0.025% T.H.D.

Rated Power

(1 x 2 Ohms)
2,000 Watts @ 1 kHz at <0.1% T.H.D.
(1 x 4 Ohms)
1,150 Watts @ 1 kHz at <0.05% T.H.D.
(1 x 8 Ohms)
625 Watts @ 1 kHz at <0.025% T.H.D.

Features

Controls
Two front panel attenuatorsRear panel mode switch

Gain select switch
Connectors
XLRSpeakon and Binding Post speaker output either 120V 20 amp IEC mains or 240/230V 20 amp IEC Mains
Dimensions
3.5”x19”x12.25”x1.5″
Weight
29.1 lbs.

Laserworld PL-3400 FULL COLORS Laser-EX demmo

Florin — Mon, 20 Apr 2015 11:28:33 +0000

Our Purelight Series provides latest state-of-the-art technology with Swiss precision. The solution for highest requirements which leaves nothing to be desired!
Units are available as single green, equipped with green DPSS lasers and new developped drivers or as fullcolor RGB lasers with red and blue high performance diode modules from Swiss production – both are the ultimate solutions for any professional operator! The Purelight Series combines latest innovations like the Sealed Housing Technology and Swiss high-end lasers with established components from the Proline and Revolution Series, just like the compact and robust enclosures, the control systems for ILDA and DMX as well as the well known 50k scan systems. Various scanner upgrades like CT-6210HP with 70kpps scanspeed available!
For the RGB systems, ultra bright 640nm red diode modules are used.
Combined with the deep blue 445nm diodes, it results in an enhanced color spectrum with a very brilliant white balance!
Purelight is the ideal solution for extraordinary challenge, with a vast power spectrum for nearly all kinds of events – inside and outside. Either as fix installation or mobile application, which is possible due to their compact plug & play concept, the low consumption, the air cooling, ruggedized housings and delivery in flightcases.
The Purelight laser projectors offer the latest, most innovative technology. Swiss made compact laser modules with very good beam characteristics and the Sealed Housing Technology make them the perfect choice for all high end applications, product presentations, exhibitions, clubs and discotheques.
Assure yourself of the high quality of the Purelight systems and apply for an appointment in our showrooms! All versions and powers are available for demo there!
When the going gets tough these units will help you out: up to 16W RGB and 20W green pure laser power! For these projectors no event should be too big. The super fast 50.000pps scanners already do a great job in these units. But if you need even more, you can get several scanner upgrades, like CT6210HP or CT6215HP.
The new Purelight BLUE BEAM models are equipped with the latest blue Strong Beam Modules.

Technical specifications:

	minimum	maximum
total power:	2400mw	3400 mw
power red:	>550mW 640nm
power green:	1200mW 532nm
power blue:	>650mW 445nm

laser:	Diode modules (red/blue), DPSS Laser (green)
laserclass:	4
control mode:	Auto Modus, DMX512, ILDA
DMX channels:	16
scanner system:	Galvo Scanner, 50.000pps at 4° (Upgrades available: ->70kpps with CT-6210, ->100kpps with CT-6215HP)
basic patterns:	more than 160 (layers, tunnels, fences, animations, graphics, fonts, etc.) + 4 animations
beam:	3mm/1mrad
deflection angle:	max. 60°
safety:	compliance to EN 60825: key-switch, interlock, voltage surge protection at X and Y galvo for best reliability. Mechanical shutter optional available
accessories:	power cable, manual, interlock-connector, key; delivery in flightcase
power supply:	110-120V, 220-240V AC 50/60 Hz
power consumption:	350W
dimensions:	675/370/420 mm (L/B/H)
net weight:	30,0kg
gross weight:	55,0kg with Flightcase

Optional upgrades:

Upgrade options scanners:

CT-6210:

Cambridge Technologies high speed scanner upgrade with high performance driver.

Scanspeed up to 70kpps at 4° optical scan angle

max scan angle: 60° optical

CT-6215HP:

High professional super fast Cambridge Technologies scanners with max 100kpps at 4° optical scan angle

max scan angle: 60° optical

Upgrade options safety:

SAFETY CARD:

The SAFETY CARD permanently monitors the laser system and cuts of power withing 40ms in case of projector system failure.

SAFETY USA:

includes:

Mechanical shutter with 6 second delay, and optional manual reset
Safety unit with laser emission indicator, key switch (key can only be removed in off position), and emergency switch. Key and emergency switch work independently and can be connected to interlock and shutter respectively
5 meter cable

OS115

Florin — Thu, 07 May 2015 18:57:17 +0000

Fully Weatherized, High Fidelity, High Output

The OS115 is Danley’s answer for those that are looking for a high performance speaker in an outdoor enclosure impervious to weather. A single cabinet can produce high quality audio beyond 130dB from a compact low frequency horn that weighs only 80lbs. A heavy duty aluminum mounting bracket and angle strap is included.

Specifications

operating
frequency range

-3dB 53Hz-600Hz
-10dB 45Hz-800Hz
continuous output
129 dB SPL
peak output
135 dB SPL
sensitivity
99 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
driver complement
15 Inch
dimensions
32.25”H x 26”W x 14.5”D
weight
80 Ibs
Rated Impedance
8 ohms
Power Rating
1000 W continuous, 4000 W program

OS80

Florin — Thu, 07 May 2015 18:48:42 +0000

Fully Weatherized, High Fidelity, High Output

The OS80 is Danley’s answer for those that are looking for a high performance speaker in an outdoor enclosure impervious to weather. A single cabinet can produce high quality audio beyond 130dB from a compact full range Synergy Horn that weighs only 51lbs. A heavy duty aluminum mounting bracket and angle strap is included. APPLICATIONS can include any outdoor location such as sports venues, arenas, athletic fields and complexes, theme and recreational parks, public gatherings, race tracks, community centers, cruise ships, hockey rinks, electronic carillons, water parks, and swimming areas.

Specifications

coverage Pattern
80Deg Conical
operating
frequency range

113 Hz – 18 kHz +/- 3 dB
70Hz – 19 kHz -10 dB
continuous output
127 dB SPL
peak output
133 dB SPL
sensitivity
101 dB (2.83 Volts into rated Z, at 1 meter) measured in free space
driver complement
one 12″, one 1.4″, coaxial
dimensions
32.25 x 26 x 14.5 inches
weight
51 Lbs.
Rated Impedance
8 ohms
Power Rating
400 watts Continuous, 1600 Watts Peak

OS90

Florin — Thu, 07 May 2015 18:54:04 +0000

Danley’s weatherproof loudspeaker.

The OS90 is Danley’s answer for those that are looking for a high performance speaker in an outdoor enclosure impervious to weather. A single cabinet can produce high quality audio beyond 120dB from a compact full range Synergy Horn that weighs only 50lbs. A heavy duty aluminum mounting bracket and angle strap is included.

Specifications

coverage Pattern
90 degree conical
operating
frequency range

150 Hz -19 kHz – 3 dB
68 Hz – 22 kHz -10dB
continuous output
126 dB SPL
peak output
132 dB SPL
sensitivity
101 dB SPL Referenced to 2.83V @1M ½ space, measured as 28.3V @ 10M
driver complement
1 x 12” Coaxial
dimensions
32.25”H x 26”W x 14.5”D
weight
50 Ibs
Rated Impedance
8 ohms

The BC218

Florin — Fri, 08 May 2015 08:33:46 +0000

The BC 218 is the newest member of the BC family of subwoofers from Danley Sound Labs. The BC218 utilizes 2 powerful 18″ drivers in a pair of horns which share a single exit. The BC or Boundary Coupled subwoofer is a new class of subwoofer, delivering not only high efficiency and power handling but actual directivity. The BC family of subwoofers will stand up to the most demanding of applications. With lots of low end, a low box count and few amp channels, the Danley Sound Labs BC is the box of choice.

Specifications

operating
frequency range

26Hz-150Hz -3dB
22Hz-185Hz -10dB
continuous output
142 dBSPL
peak output
148 dBSPL
154 dB SPL Peak @ 68 Hz
sensitivity
110 dBSPL
116 dBSPL @ 68 Hz
driver complement
2 x 18” Long excursion
dimensions
60 x 60 x 30
weight
511 Ibs.
Rated Impedance
2×8 ohm
Power Rating
3,400W continuous
13,600W Peak

The BC412

Florin — Fri, 08 May 2015 08:31:56 +0000

Boundary Compliant Sub with 4 12s

The BC412 is another unique subwoofer alignment from Danley Sound Labs. Using four 12” woofers combining into a single exit provides massive amounts of punch and extension out of a single cabinet. Due to the physical size of the BC design’s center exit the boundary exhibits forward directivity which can be increased when used in stacking multiple enclosures.

Specifications

operating
frequency range

44Hz-200Hz -3dB
36Hz-200hz -10dB
continuous output
142 dB SPL
peak output
148 dB SPL
sensitivity
119 dBSPL @ 125 Hz (Referenced to 2.83V @1M 1⁄2 space, measured as 28.3V @ 10M)
driver complement
Four 12 inch Long Excursion
dimensions
50″ X 50″ X 18″
weight
277 lbs.
Rated Impedance
2 ohms or 2 x 4 ohms
Power Rating
4000 W continuous